Kelo-cote Uv Spf30 Silicone Gel For Scars Uv 6g
- bvseo_sdk, p_sdk, 3.2.1
- CLOUD, getAggregateRating, 94.61ms
- REVIEWS, PRODUCT
- bvseo-msg: HTTP status code of 404 was returned;
Description
KELO-COTE
Kelo-Cote UV Gel for Scars SPF 30 6g is a patented gel with silicon recommended in prevention or to treat hypertrophic scars and keloids, containing high protection sunscreens (SPF30). It contributes to avoid the formation of abnormal scars.
Well tolerated, it takes care of the scar and protects from sun rays.
Transparent and without odour, it is rapid to dry and suits to sensitive skins and to children.
How to use it
Make sure the scar is clean and dry.
Spray along the scar in a slight back and forth movement.
Kelo-cote should be applied in a homogeneous very thin layer and evenly over the affected area.
Allow to air dry before covering with sunscreen or compressive clothing.
For maximum effect, Kelo-cote should remain in contact with the skin for 24 hours.
Once dry, Kelo-cote may be covered with compressive clothing, sunscreen or cosmetics.
Kelo-cote Spray should dry in 4 or 5 minutes, otherwise it is that you probably have applied too thick a layer. Please gently remove excess to allow drying.
Kelo-cote should be applied twice daily for 3 months for optimum effect and may be applied under compressive clothing or sunscreen. The recommended minimum treatment is 2 to 3 months. In the case of larger and older scars the duration of the treatment may be extended and it is recommended to continue treatment if improvements are still observed after the first 3 months.
The Kelo-dimensional drying process is facilitated by the temperature difference between the gel and the skin. To reduce the drying time in hot climates, keep Kelo-Cote in the refrigerator. In cold weather, use the low speed of a hair dryer to reduce the drying time.
Compositions & ingredients
The composition may be subject to variations, so we advise you to always check the list on the purchased product.
INCI Formula: 7.5% octinoxate, 5.0% octisalate, 10% octocrylene, 6.0% oxybenzone, polysiloxanes, silicon dioxide, isopropyl myristate.
Avoid direct contact with eyes, mucous membranes, third degree burns and open wounds.
KELO-COTE should not be used on dermatological conditions that interfere with the integrity of the skin.
KELO-COTE may stain clothing if it is not completely dry.
KELO-COTE is reserved exclusively for external use.
In case of irritation, discontinue use and consult a physician.
This product should be kept out of the reach of children.
Store at a temperature below 25 ° C.
Do not use after the expiration date (EXP) printed on the tube.
This Class I medical device is a regulated health product that carries under this regulation the CE marking.
Carefully read the instructions on the package leaflet or on the product sheets.
For more information, ask your doctor or pharmacist for advice.
Manufacturer: Advanced Bio-Technologies, Inc. Suwanee, GA 30024, USA.
EC Authorized Representative: Sinclair Pharmaceuticals Ltd, Chester, CH4 9QZ, UK.
Our selection
Reviews
- bvseo_sdk, p_sdk, 3.2.1
- CLOUD, getReviews, 8.22ms
- REVIEWS, PRODUCT
- bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
Questions
- bvseo_sdk, p_sdk, 3.2.1
- CLOUD, getContent, 95.44ms
- QUESTIONS, PRODUCT
- bvseo-msg: HTTP status code of 404 was returned;
