Menicon MeniCare Pure Multifunction Solution Pack + Progent
- bvseo_sdk, p_sdk, 3.2.1
- CLOUD, getAggregateRating, 94.75ms
- REVIEWS, PRODUCT
- bvseo-msg: HTTP status code of 404 was returned;
Description
MENICON
Menicare Pure + Progent
Multi-purpose solution
For all rigid permeable lenses
Class IIb medical device
70ml + 5 treatments
The inseparable MENICARE PURE & PROGENT to care for rigid permeable lenses. MENICARE PURE :
- For all rigid permeable lenses, for daily use comfort.
- Cleans your rigid permeable lenses.
- Decontaminates bacteria and fungi in 30 minutes and amoebae in 4 hours.
- Keeps your rigid permeable lenses in their case.
- Allows you to rinse your rigid permeable lenses.
PROGENT: The daily reflex that guarantees you perfect quality of vision.
De-proteinates your rigid permeable lenses (Proteins are responsible for clogging and loss of sharpness in your lenses).
Intensive cleaning.
Disinfects in just 5 minutes.
Efficiency against bacteria, fungi, amoebae and viruses.
How to use it
Read the instructions for use carefully
For MeniCare Pure:
To open MeniCare Pure for the first time, turn the cap clockwise as far as it will go. The tip inside the cap will pierce the seal.
Wash your hands thoroughly before handling the lenses.
Gently massage the lens with a few drops of MENICARE PURE for 20 seconds.
Place each lens in its holder and rinse with MENICARE PURE.
Fill the lens case with MENICARE PURE and soak the lenses for at least 30 minutes or overnight.
Before inserting, rinse the lenses with MENICARE PURE.
Keep the case clean and dry after use. Do not close your case after inserting your lenses, to allow it to air dry.
The lenses can be stored in the closed case until they are used, for a maximum of 30 days. If you wish to store them for a longer period, they must be cleaned and decontaminated with MeniCare Pure solution every 30 days,
For Progent:
Clean your lenses thoroughly with your usual cleaning solution. Place the lenses in their respective holders attached to the lid of the Progent case
R = right, L = left, for Intensive cleaning.
Carefully open the doses in an upright position. Gently twist the end, taking care not to squeeze the dose or touch the opening with your fingers.
Place the end of the dose inside the Progent case and gently pour in solution A and then solution B to avoid splashing solution.
Close the Progent case and gently Agita several times to mix solutions A and B. 4 Leave the lenses in the solution for a maximum of 30 minutes.
Remove the lid from the Progent case and empty the contents. Rinse the lenses thoroughly in their holders with a standard rinsing solution.
Then clean the lenses with the usual solution and rinse. The lenses are now ready to be placed on the eyes or stored in their case.
Rinse the Progent case and lid with the usual rinsing solution and leave to air dry.
Compositions & ingredients
The composition may be subject to variations, so we advise you to always check the list on the purchased product.
Composition:
MENICARE PURE: ?-Polylysine 0.01 %, disodium edetate 0.05 %, HCO-60 0.10 %.
For external use only
Never use tap water or any non-sterile product with Contact lenses, as this could lead to microbial contamination and irreversible eye damage.
Consult your doctor or a specialist before using any medical eye product if you wear Contact lenses.
Do not use this solution if you are allergic to any of the ingredients.
After opening, use MeniCare Pure within 3 months and make sure the bottle is properly closed after each use.
Avoid touching the tip of the bottle with your fingers.
Do not swallow the solution.
Keep this solution out of the reach of Children.
Never use the product after the expiry date.
Never use the solution if the protective film around the cap is broken before the first use.
Never use this solution with soft lenses.
Keep the case clean and dry after use.
Store the product in a room at room temperature (<25°C)
Keep the product out of direct sunlight.
Change the case each time you change the bottle of MeniCare Pure.
Consult your Ophthalmologist before changing the solution.
Do not use as a lubricant or moisturising solution.
If discomfort or irritation persists, remove contact lenses, discontinue use and consult your ophthalmologist.
MENICARE PURE (manufactured by Menicon Co., Ltd) and PROGENT (manufactured by Menicon Pharma) are class IIb medical devices marked CE 0483. Please read the instructions for use carefully.
PROGENT: Dose A: Sodium hypochlorite solution (NaCIO 20.30 mg - purified water q.s.p 5 ml). Dose B: Potassium bromide solution (KBr 30.75 mg - purified water q.s.p 5 ml).
Do not instil the product into the eyes, nose or mouth. In the event of accidental splashing, rinse eyes immediately with plenty of water and consult your ophthalmologist immediately.
- Rinsing your lenses thoroughly with your usual rinsing solution is an essential step after soaking in Progent solution.
- KEEP THE PRODUCT OUT OF THE REACH OF CHILDREN
Lenses should not be soaked for more than 30 minutes. Soaking lenses for longer than this will not affect their quality, but may discolour them.
- Important: do not swallow.
- To be used weekly for daily wear (and when lenses are removed for continuous wear).
- Do not use solution A or B separately.
- Single-use doses. After each use, solution A+B and the doses must be discarded.
- Store at room temperature (15-25°C).
- Avoid contact with Skin and splashes on Textiles: risk of bleaching.
- Do not use after the expiry date (printed on the doses).
- Keep out of direct sunlight.
CONTRAINDICATIONS
- Do not use for soft lenses.
- History of allergy to any of the ingredients.
SIDE EFFECTS
In the event of persistent discomfort or irritation, remove the contact lenses, stop using the product and consult an ophthalmologist.
LENS DISINFECTION
Progent disinfects against micro-organisms (bacteria, fungi, viruses, amoebae) within 5 minutes of soaking.
Our selection
Reviews
- bvseo_sdk, p_sdk, 3.2.1
- CLOUD, getReviews, 7.36ms
- REVIEWS, PRODUCT
- bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
Questions
- bvseo_sdk, p_sdk, 3.2.1
- CLOUD, getContent, 116.22ms
- QUESTIONS, PRODUCT
- bvseo-msg: HTTP status code of 404 was returned;
