Scholl Pedi Velvet Smooth Electric Pedicure Foot File

It's so easy to use -gently rotate the file over hard skin and see the dead skin dissappear.

Retain the outer packaging for future reference. See inside for full instructions.

Using for the First Time

1. Unscrew the base of the unit in an anti-clockwise direction and remove.
2. Remove and dispose of both the red insulator tab and the plastic ring.
3. Replace the base of the unit and screw in a clockwise direction until secure.
4. Follow the directions for Regular Usage.

Regular Usage

1. Remove the protective roller cover before use.
2. Ensure that the roller head is securely inserted into the unit. Do not use without the roller head attached.
3. Turn on by twisting the silver ring to the left and gently glide the rollerhead over heard skin and the dead skin will gradually exfoliate. Use only on dry skin. Do not press too hard, or the unit will stop.
4. Turn off and check if you have achieved the softness you desire. If not, turn on and repeat until the level of smoothness is obtained.
5. Once you feet are starting to resemble smooth, happy feet again, breathe a sigh of relief.
6. Turn off by twisting the silver ring to the right.
7. Wipe or rinse feet to remove excess dead skin particles.
8. Thoroughly dry feet
9. Apply moisturiser and massage into your fabulous smooth feet!

Cleaning after use

The Velvet Smooth™ with Diamond Crystals Electronic Foot File is not waterproof. Detach and wash the roller head to clean the surface.

1. Turn the unit off.
2. Remove the roller by pressing the eject button on the side of the unit and gently pulling the roller away.
3. Rinse the roller head under the tap.
4. Clean the body of the unit with a clean damp cloth.
5. Dry both the roller head and main unit with a clean dry cloth.
6. Replace the roller and the protective cover.

Changing the Roller Head

For the perfect finishing touch use Velvet Smooth™ with Diamond Crystals Soft Touch Roller Head. For very hard, stubborn skin Velvet Smooth™ with Dicamond Crystals Extra Coarse Roller Head. Replace the roller head when you find it becomes less effective. Use only Scholl Velvet Smooth Roller Heads with this product.

1. Ensure that the unit is turned off.
2. Remove the roller by pressing the eject button on the side of the unit and gently pulling the roller away.
3. Place the new roller into the unit by pressing in the pins on either sides of the roller head and inserting the head into the device.
4. Check that the roller head is securely attached to the device before use

Changing the Batteries

1. Unscrew the base of the unit in an anti-clockwise direction.
2. Remove the base and remove the used batteries.
3. Insert 4 new new AA batteries in the directions indicated on the unit.
4. Replace the base and screw in a clockwise dorection until secure.
5. Do not mix old and new batteries or alkaline and standard batteries. Do not use rechargable batteries. Used batteries must be recycled or disposed of correctly.

Products showing the 'Crossed Through' wheelie bin symbol must be recycled separately from household waste at the end of their useful life. Please DO NOT dispose of appliance in normal household waste. Your local appliance retailer may operate a 'take-back' scheme when you are ready to purchase a replacement product, alternatively contact your local government authority for further help and advice on where to take your appliance for recycling.